• Ali Ruhşen Çete Gaziantep Üniversitesi


This document describes a propeller analysis software technical information and verification studies. The analysis software method is a lifting line method that uses 2D aerodynamic cross-sectional data. This method and its implementation in this software is described in detail in the publication. In validation studies, numerical stability, convergence and consistency of the method were investigated. Propeller with 2 experimental data was chosen as verification example. These two propellers; analysis software, experimental and computational fluid mechanics analysis results were compared. The analysis method gives good results in the accuracy of the 2D cross-section data. Although the 2-dimensional data in this study are not limited and detailed, the results are very good and the results are much better than the HAM analysis results. In this context, it is evaluated that this software which gives very fast and precise results will be very useful in its related field of activity.


[1] EPPS, B.P., KIMBALL, R.W., “Unified Rotor Lifting Line Theory”, Journal of Ship Research, Vol. 57, No. 4, 1-24, 2013.
[2] FLOOD, K.M., “Propeller Performance Analysis Using Lifting Line Theory”, Master Thessis of Massachusetts Institute of Technology, June 2009.
[3] GOLDSTEIN, S., “On the Vortex Theory of Screw Propellers“, Communicated by L.Prandtl, For.Mem.R.S., pp 440-465, 1929
[4] LERB, H.W., “Moderately Loaded Propellers with a Finite Number of Blades and an Arbitrary Distribution of Circulation“, The Annual Meeting of the Society of Naval Architects and Marine Engineers in Newyork, November 13-14. , 1952
[5] KAWADA, S., “Induced Velocity by Helical Vortices”, Journal of the Aeronautical Sciences, Vol.3, 1936.
[6] VYRIOTES, P., “Preliminary Design and Analysis of Propellers”, Ms Thesis of Carleton University. , 1991
[7] KERWIN, J., “Hydrodynamic Theory for Propeller Design and Analysis”, Lecture Notes, 1981
[8] SORENSEN, J.N. and SHEN, W.Z., “Numerical Modeling of Wind Turbine Wakes”, J. Fluids Eng 124(2), 393-399 (May 28, 2002) (7 pages), doi:10.1115/1.1471361, 2002
[9] GUR, O., ROSEN, A., “Comparison between blade-element models of propellers”, The Aeronautical Journal, Vol.112, No:1138, 2008.
[10] BATCHELOR, F.R.S., 1980, “Akışkanlar Mekaniği, Cilt I”, Çeviren, Emin ERDOĞAN, İTÜ Kütüphanesi, Sayı 1171.
[11] MÜFTÜOĞLU, S., 1981, “Hidro-Aerodinamik”, İTÜ Kütüphanesi, Sayı 1209.
[12] KUNDU, P.K., and COHEN, I.M., , “Fluid Mechanics”, .
[13] ABRAMOWITZ, M. and STEGUN, I., “Handbook of Mathematical Functions”, Dover Publications Inc. New York
[14] WOOD, D.H., 1930, “Full-Scale Tests of Metal Propellers at High Tip Speeds”, NACA Report 375.
[15] STACK, J., 1933, “The NACA High Speed Wind Tunnel and Tests of Six Propeller Section”, NACA Report 463.
[16] MILEY, S.J., 1982, “A Catalog of Low Reynolds Number Airfoil Data For Wind Turbine Applications”, U.S. Department of Commerce National Technical Information Service, DE82-021712.
How to Cite
ÇETE, Ali Ruhşen. DEVELOPMENT OF A PROPELLER ANAYSIS SOFTWARE. Journal of Aeronautics and Space Technologies, [S.l.], v. 11, n. 1, p. 45-55, jan. 2018. ISSN 2148-1059. Available at: <>. Date accessed: 20 feb. 2018.